qca/include/QtCrypto/qca_basic.h

/*
 * qca_basic.h - Qt Cryptographic Architecture
 * Copyright (C) 2003-2005  Justin Karneges <justin@affinix.com>
 * Copyright (C) 2004-2006  Brad Hards <bradh@frogmouth.net>
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with this library; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
 *
 */

/**
   \file qca_basic.h

   Header file for classes for cryptographic primitives (basic operations)

   \note You should not use this header directly from an
   application. You should just use <tt> \#include \<QtCrypto>
   </tt> instead.
*/

#ifndef QCA_BASIC_H
#define QCA_BASIC_H

#include "qca_core.h"

namespace QCA
{
	/**
	   \class Random qca_basic.h QtCrypto

	   Source of random numbers

	   QCA provides a built in source of random numbers, which
	   can be accessed through this class. You can also use
	   an alternative random number source, by implementing
	   another provider.
	 
	   The normal use of this class is expected to be through the
	   static members - randomChar(), randomInt() and randomArray().
	 */
	class QCA_EXPORT Random : public Algorithm
	{
	public:
		/**
		 * Standard Constructor
		 *
		 * \param provider the provider library for the random
		 *                 number generation
		 */ 
		Random(const QString &provider = QString());

		/**
		 * Provide a random byte.
		 *
		 * This method isn't normally required - you should use
		 * the static randomChar() method instead.
		 *
		 * \sa randomChar
		 */
		uchar nextByte();

		/**
		 * Provide a specified number of random bytes
		 *
		 * This method isn't normally required - you should use
		 * the static randomArray() method instead.
		 *
		 * \param size the number of bytes to provide
		 *
		 * \sa randomArray
		 */
		SecureArray nextBytes(int size);

		/**
		 * Provide a random character (byte)
		 *
		 * This is the normal way of obtaining a single random char
		 * (ie. 8 bit byte), as shown below:
		 * \code
		 * myRandomChar = QCA::Random::randomChar();
		 * \endcode
		 *
		 * If you need a number of bytes, perhaps randomArray() may be of use
		 */
		static uchar randomChar();

		/**
		 * Provide a random integer
		 *
		 * This is the normal way of obtaining a single random integer,
		 * as shown below:
		 * \code
		 * myRandomInt = QCA::Random::randomInt();
		 * \endcode
		 */
		static int randomInt();

		/**
		 * Provide a specified number of random bytes
		 * 
		 * \code
		 * // build a 30 byte secure array.
		 * SecureArray arry = QCA::Random::randomArray(30);
		 * \endcode
		 *
		 * \param size the number of bytes to provide
		 */
		static SecureArray randomArray(int size);
	};

	/**
	   \class Hash qca_basic.h QtCrypto

	   General class for hashing algorithms.

	   Hash is the class for the various hashing algorithms
	   within %QCA. SHA256, SHA1 or RIPEMD160 are recommended for
	   new applications, although MD2, MD4, MD5 or SHA0 may be
	   applicable (for interoperability reasons) for some
	   applications. 

	   To perform a hash, you create a Hash object, call update()
	   with the data that needs to be hashed, and then call
	   final(), which returns a QByteArray of the hash result. An
	   example (using the SHA1 hash, with 1000 updates of a 1000
	   byte string) is shown below:

	   \code
	   if(!QCA::isSupported("sha1"))
	       printf("SHA1 not supported!\n");
	   else {
	       QByteArray fillerString;
	       fillerString.fill('a', 1000);

	       QCA::Hash shaHash("sha1");
	       for (int i=0; i<1000; i++)
	           shaHash.update(fillerString);
	       QByteArray hashResult = shaHash.final();
	       if ( "34aa973cd4c4daa4f61eeb2bdbad27316534016f" == QCA::arrayToHex(hashResult) ) {
	           printf("big SHA1 is OK\n");
	       } else {
                   printf("big SHA1 failed\n");
	       }
	   }
	   \endcode

	   If you only have a simple hash requirement - a single
	   string that is fully available in memory at one time - then
	   you may be better off with one of the convenience
	   methods. So, for example, instead of creating a QCA::Hash
	   object, then doing a single update() and the final() call;
	   you could simply call QCA::Hash("algoName").hash() with the
	   data that you would otherwise have provided to the update()
	   call.
	 */
	class QCA_EXPORT Hash : public Algorithm, public BufferedComputation
	{
	public:
		/**
		 *  Constructor
		 *
		 * \param type label for the type of hash to be
		 * created (eg "sha1" or "md2")
		 * \param provider the name of the provider plugin
		 * for the subclass (eg "qca-openssl")
		 */
		Hash(const QString &type, const QString &provider = QString());

		/**
		 * Reset a hash, dumping all previous parts of the
		 * message.
		 *
		 * This method clears (or resets) the hash algorithm,
		 * effectively undoing any previous update()
		 * calls. You should use this call if you are re-using
		 * a Hash sub-class object to calculate additional
		 * hashes.
		 */
		virtual void clear();

		/**
		 * Update a hash, adding more of the message contents
		 * to the digest. The whole message needs to be added
		 * using this method before you call final(). 
		 *
		 * If you find yourself only calling update() once,
		 * you may be better off using a convenience method
		 * such as hash() or hashToString() instead.
		 *
 		 * \param a the byte array to add to the hash 
		 */
		virtual void update(const SecureArray &a);

		/**
		 * \overload
		 *
		 * \param a the QByteArray to add to the hash 
		 */
		virtual void update(const QByteArray &a);

		/**
		 * \overload
		 *
		 * This method is provided to assist with code that
		 * already exists, and is being ported to %QCA. You are
		 * better off passing a SecureArray (as shown above)
		 * if you are writing new code.
		 *
		 * \param data pointer to a char array
		 * \param len the length of the array. If not specified
		 * (or specified as a negative number), the length will be
		 * determined with strlen(), which may not be what you want
		 * if the array contains a null (0x00) character.
		 */
		virtual void update(const char *data, int len = -1);

		/**
		 * \overload
		 *
		 * This allows you to read from a file or other
		 * I/O device. Note that the device must be already
		 * open for reading
		 *
		 * \param file an I/O device
		 *
		 * If you are trying to calculate the hash of
		 * a whole file (and it isn't already open), you
		 * might want to use code like this:
		 * \code
		 * QFile f( "file.dat" );
		 * if ( f1.open( IO_ReadOnly ) ) {
		 *     QCA::Hash hashObj("sha1");
		 *     hashObj.update( f1 );
		 *     QString output = hashObj.final() ) ),
		 * }
		 * \endcode
		 */
		virtual void update(QIODevice &file);

		/**
		 * Finalises input and returns the hash result
		 *
		 * After calling update() with the required data, the
		 * hash results are finalised and produced.
		 *
		 * Note that it is not possible to add further data (with
		 * update()) after calling final(), because of the way
		 * the hashing works - null bytes are inserted to pad
		 * the results up to a fixed size. If you want to
		 * reuse the Hash object, you should call clear() and
		 * start to update() again.
		 */
		virtual SecureArray final();

		/**
		 * %Hash a byte array, returning it as another
		 * byte array.
		 * 
		 * This is a convenience method that returns the
		 * hash of a SecureArray.
		 * 
		 * \code
		 * SecureArray sampleArray(3);
		 * sampleArray.fill('a');
		 * SecureArray outputArray = QCA::Hash("md2")::hash(sampleArray);
		 * \endcode
		 * 
		 * \param array the QByteArray to hash
		 *
		 * If you need more flexibility (e.g. you are constructing
		 * a large byte array object just to pass it to hash(), then
		 * consider creating an Hash object, and then calling
		 * update() and final().
		 */
		SecureArray hash(const SecureArray &array);

		/**
		 * %Hash a byte array, returning it as a printable
		 * string
		 * 
		 * This is a convenience method that returns the
		 * hash of a QSeecureArray as a hexadecimal
		 * representation encoded in a QString.
		 * 
		 * \param array the QByteArray to hash
		 *
		 * If you need more flexibility, you can create a Hash
		 * object, call Hash::update() as required, then call 
		 * Hash::final(), before using the static arrayToHex() method.
		 */
		QString hashToString(const SecureArray &array);
	};

	/** \page hashing Hashing Algorithms

	There are a range of hashing algorithms available in
	%QCA. Hashing algorithms are used with the Hash and
	MessageAuthenticationCode classes.

	The MD2 algorithm takes an arbitrary data stream, known as the
	message and outputs a condensed 128 bit (16 byte)
	representation of that data stream, known as the message
	digest. This algorithm is considered slightly more secure than MD5,
	but is more expensive to compute. Unless backward
	compatibility or interoperability are considerations, you
	are better off using the SHA1 or RIPEMD160 hashing algorithms.
	For more information on %MD2, see B. Kalinski RFC1319 "The %MD2
	Message-Digest Algorithm". The label for MD2 is "md2".

	The MD4 algorithm takes an arbitrary data stream, known as the
	message and outputs a condensed 128 bit (16 byte)
	representation of that data stream, known as the message
	digest. MD4 is not considered to be secure, based on
	known attacks. It should only be used for applications where
	collision attacks are not a consideration (for example, as
	used in the rsync algorithm for fingerprinting blocks of
	data). If a secure hash is required, you are better off using
	the SHA1 or RIPEMD160 hashing algorithms. MD2 and MD5 are both
	stronger 128 bit hashes.  For more information on MD4, see
	R. Rivest RFC1320 "The %MD4 Message-Digest Algorithm". The
	label for MD4 is "md4".

	The MD5 takes an arbitrary data stream, known as the message
	and outputs a condensed 128 bit (16 byte) representation of
	that data stream, known as the message digest. MD5 is not
	considered to be secure, based on known attacks. It should
	only be used for applications where collision attacks are not
	a consideration. If a secure hash is required, you are better
	off using the SHA1 or RIPEMD160 hashing algorithms.  For more
	information on MD5, see R. Rivest RFC1321 "The %MD5
	Message-Digest Algorithm". The label for MD5 is "md5".

	The RIPEMD160 algorithm takes an arbitrary data stream, known
	as the message (up to \f$2^{64}\f$ bits in length) and outputs
	a condensed 160 bit (20 byte) representation of that data
	stream, known as the message digest. The RIPEMD160 algorithm
	is considered secure in that it is considered computationally
	infeasible to find the message that produced the message
	digest. The label for RIPEMD160 is "ripemd160".

	The SHA-0 algorithm is a 160 bit hashing function, no longer
	recommended for new applications because of known (partial)
	attacks against it. The label for SHA-0 is "sha0".

	The SHA-1 algorithm takes an arbitrary data stream, known as
	the message (up to \f$2^{64}\f$ bits in length) and outputs a
	condensed 160 bit (20 byte) representation of that data
	stream, known as the message digest. SHA-1 is considered
	secure in that it is considered computationally infeasible to
	find the message that produced the message digest. For more
	information on the SHA-1 algorithm,, see Federal Information
	Processing Standard Publication 180-2 "Specifications for the
	Secure %Hash Standard", available from
	http://csrc.nist.gov/publications/. The label for SHA-1 is
	"sha1".  

	The SHA-224 algorithm takes an arbitrary data stream, known as
	the message (up to \f$2^{64}\f$ bits in length) and outputs a
	condensed 224 bit (28 byte) representation of that data
	stream, known as the message digest. SHA-224 is a "cut down"
	version of SHA-256, and you may be better off using SHA-256 in
	new designs. The SHA-224 algorithm is considered secure in
	that it is considered computationally infeasible to find the
	message that produced the message digest. For more information
	on SHA-224, see Federal Information Processing Standard
	Publication 180-2 "Specifications for the Secure %Hash
	Standard", with change notice 1, available from
	http://csrc.nist.gov/publications/. The label for SHA-224 is
	"sha224".  

	The SHA-256 algorithm takes an arbitrary data stream, known as
	the message (up to \f$2^{64}\f$ bits in length) and outputs a
	condensed 256 bit (32 byte) representation of that data
	stream, known as the message digest. The SHA-256 algorithm is
	considered secure in that it is considered computationally
	infeasible to find the message that produced the message
	digest. For more information on SHA-256, see Federal
	Information Processing Standard Publication 180-2
	"Specifications for the Secure %Hash Standard", available from
	http://csrc.nist.gov/publications/. The label for SHA-256 is
	"sha256".  

	The SHA-384 algorithm takes an arbitrary data stream, known as
	the message (up to \f$2^{128}\f$ bits in length) and outputs a
	condensed 384 bit (48 byte) representation of that data
	stream, known as the message digest. The SHA-384 algorithm is
	a "cut down" version of SHA-512, and you may be better off
	using SHA-512 in new designs. The SHA-384 algorithm is
	considered secure in that it is considered computationally
	infeasible to find the message that produced the message
	digest. For more information on SHA-384, see Federal
	Information Processing Standard Publication 180-2
	"Specifications for the Secure %Hash Standard", available from
	http://csrc.nist.gov/publications/. The label for SHA-384 is
	"sha384".   

	The SHA-512 algorithm takes an arbitrary data stream, known as
	the message (up to \f$2^{128}\f$ bits in length) and outputs a
	condensed 512 bit (64 byte) representation of that data
	stream, known as the message digest. The SHA-512 algorithm is
	considered secure in that it is considered computationally
	infeasible to find the message that produced the message
	digest. For more information on SHA-512, see Federal
	Information Processing Standard Publication 180-2
	"Specifications for the Secure %Hash Standard", available from
	http://csrc.nist.gov/publications/. The label for SHA-512 is
	"sha512".   

	*/

        /** \Page padding Padding

	For those Cipher sub-classes that are block based, there are modes
	that require a full block on encryption and decryption - %Cipher Block
	Chaining mode and Electronic Code Book modes are good examples. 
	
	Since real world messages are not always a convenient multiple of a
	block size, we have to adding <i>padding</i>. There are a number of
	padding modes that %QCA supports, including not doing any padding
	at all.
	
	If you are not going to use padding, then you can pass 
	QCA::Cipher::NoPadding as the pad argument to the Cipher sub-class, however
	it is then your responsibility to pass in appropriate data for
	the mode that you are using.

	The most common padding scheme is known as PKCS#7 (also PKCS#1), and
	it specifies that the pad bytes are all equal to the length of the 
	padding ( for example, if you need three pad bytes to complete the block, then
	the padding is 0x03 0x03 0x03 ).

	On encryption, for algorithm / mode combinations that require
	padding, you will get a block of ciphertext when the input plain text block
	is complete. When you call final(), you will get out the ciphertext that
	corresponds to the last bit of plain text, plus any padding. If you had
	provided plaintext that matched up with a block size, then the cipher
	text block is generated from pure padding - you always get at least some
	padding, to ensure that the padding can be safely removed on decryption.
	
	On decryption, for algorithm / mode combinations that use padding,
	you will get back a block of plaintext when the input ciphertext block
	is complete. When you call final(), you will a block that has been stripped
	of ciphertext.
	*/

	/**
	   \class Cipher qca_basic.h QtCrypto

	   General class for cipher (encryption / decryption) algorithms.

	   Cipher is the class for the various algorithms that perform
	   low level encryption and decryption within %QCA.

	   AES128, AES192 and AES256 are recommended for new applications.

	   Standard names for ciphers are:
	   - Blowfish - "blowfish"
	   - TripleDES - "tripledes"
	   - DES - "des"
	   - AES128 - "aes128"
	   - AES192 - "aes192"
	   - AES256 - "aes256"

	 */
	class QCA_EXPORT Cipher : public Algorithm, public Filter
	{
	public:
		/**
		 * Mode settings for cipher algorithms
		 */
		enum Mode
		{
			CBC, ///< operate in %Cipher Block Chaining mode
			CFB, ///< operate in %Cipher FeedBack mode
			ECB, ///< operate in Electronic Code Book mode
			OFB  ///< operate in Output FeedBack Mode
		};

		/**
		 * Padding variations for cipher algorithms
		 */
		enum Padding
		{
			DefaultPadding, ///< Default for cipher-mode
			NoPadding,      ///< Do not use padding
			PKCS7           ///< Pad using the scheme in PKCS#7
		};


		/**
		   Standard constructor

		   \param type the name of the cipher specialisation to use (e.g. "aes128")
		   \param mode the operating Mode to use (e.g. QCA::Cipher::CBC)
		   \param pad the type of Padding to use
		   \param dir the Direction that this Cipher should use (Encode for encryption, Decode for decryption)
		   \param key the SymmetricKey array that is the key
		   \param iv the InitializationVector to use (not used for ECB mode)
		   \param provider the name of the Provider to use

		   \note Padding only applies to CBC and ECB modes.  CFB and OFB ciphertext is always
		   the length of the plaintext.
		*/
		Cipher( const QString &type, Mode mode, Padding pad = DefaultPadding,
			Direction dir = Encode, const SymmetricKey &key = SymmetricKey(), 
			const InitializationVector &iv = InitializationVector(),
			const QString &provider = QString() );

		/** 
		 * Standard copy constructor
		 */
		Cipher(const Cipher &from);
		~Cipher();

		/**
		   Assignment operator
		   
		   \param from the Cipher to copy state from
		*/
		Cipher & operator=(const Cipher &from);

		/**
		 * Return acceptable key lengths
		 */
		KeyLength keyLength() const;

		/**
		 * Test if a key length is valid for the cipher algorithm
		 *
		 * \param n the key length in bytes
		 * \return true if the key would be valid for the current algorithm
		 */
		bool validKeyLength(int n) const;

		/**
		 * return the block size for the cipher object
		 */
		uint blockSize() const;

		/**
		 * reset the cipher object, to allow re-use
		 */
		virtual void clear();

		/** 
		 * pass in a byte array of data, which will be encrypted or decrypted
		 * (according to the Direction that was set in the constructor or in
		 * setup() ) and returned.
		 *
		 * \param a the array of data to encrypt / decrypt
		 */
		virtual SecureArray update(const SecureArray &a);

		/**
		 * complete the block of data, padding as required, and returning
		 * the completed block
		 */
		virtual SecureArray final();

		/**

		 Test if an update() or final() call succeeded.
		 
		 \return true if the previous call succeeded
		*/
		virtual bool ok() const;

		/**
		   Reset / reconfigure the Cipher

		   You can use this to re-use an existing Cipher, rather than creating a new object
		   with a slightly different configuration.

		   \param dir the Direction that this Cipher should use (Encode for encryption, Decode for decryption)
		   \param key the SymmetricKey array that is the key
		   \param iv the InitializationVector to use
		*/
		void setup(Direction dir, const SymmetricKey &key, const InitializationVector &iv = InitializationVector());

		/**
		   Construct a Cipher type string

		   \param cipherType the name of the algorithm (eg AES128, DES)
		   \param modeType the mode to operate the cipher in (eg QCA::CBC, QCA::CFB)
		   \param paddingType the padding required (eg QCA::NoPadding, QCA::PCKS7)
		*/
		static QString withAlgorithms(const QString &cipherType, Mode modeType, Padding paddingType);

	private:
		class Private;
		Private *d;
	};

	/**
	   \class MessageAuthenticationCode  qca_basic.h QtCrypto

	   General class for message authentication code (MAC) algorithms.

	   MessageAuthenticationCode is a class for accessing the various 
	   message authentication code algorithms within %QCA.
	   HMAC using SHA1 ("hmac(sha1)") or HMAC using SHA256 ("hmac(sha256)") 
	   is recommended for new applications.

	   Note that if your application is potentially susceptable to "replay attacks"
	   where the message is sent more than once, you should include a counter in
	   the message that is covered by the MAC, and check that the counter is always
	   incremented every time you receive a message and MAC.
	   
	   For more information on HMAC, see H. Krawczyk et al. RFC2104 
	   "HMAC: Keyed-Hashing for Message Authentication"
	 */
	class QCA_EXPORT MessageAuthenticationCode : public Algorithm, public BufferedComputation
	{
	public:
		/**
		   Standard constructor

		   \param type the name of the MAC (and algorithm, if applicable) to use
		   \param key the shared key
		   \param provider the provider to use, if a particular provider is required
		 */
		MessageAuthenticationCode(const QString &type,
					  const SymmetricKey &key,
					  const QString &provider = QString());

		/**
		 * Standard copy constructor
		 */
		MessageAuthenticationCode(const MessageAuthenticationCode &from);

		~MessageAuthenticationCode();

		/**
		 * Assignment operator.
		 *
		 * Copies the state (including key) from one MessageAuthenticationCode
		 * to another
		 */
		MessageAuthenticationCode & operator=(const MessageAuthenticationCode &from);

		/**
		 * Return acceptable key lengths
		 */
		KeyLength keyLength() const;

		/**
		 * Test if a key length is valid for the MAC algorithm
		 *
		 * \param n the key length in bytes
		 * \return true if the key would be valid for the current algorithm
		 */
		bool validKeyLength(int n) const;
		
		/**
		 * Reset a MessageAuthenticationCode, dumping all
		 * previous parts of the message.
		 *
		 * This method clears (or resets) the algorithm,
		 * effectively undoing any previous update()
		 * calls. You should use this call if you are re-using
		 * a %MessageAuthenticationCode sub-class object
		 * to calculate additional MACs. Note that if the key
		 * doesn't need to be changed, you don't need to call
		 * setup() again, since the key can just be reused.
		 */
		virtual void clear();

		/**
		 * Update the MAC, adding more of the message contents
		 * to the digest. The whole message needs to be added
		 * using this method before you call final(). 
		 *
		 * \param array the message contents
		 */
		virtual void update(const SecureArray &array);

		/**
		 * Finalises input and returns the MAC result
		 *
		 * After calling update() with the required data, the
		 * hash results are finalised and produced.
		 *
		 * Note that it is not possible to add further data (with
		 * update()) after calling final(). If you want to
		 * reuse the %MessageAuthenticationCode object, you
		 * should call clear() and start to update() again.
		 */
		virtual SecureArray final();

		/**
		 * Initialise the MAC algorithm.
		 *
		 * \param key the key to use for the algorithm
		 */
		void setup(const SymmetricKey &key);

	private:
		class Private;
		Private *d;
	};


	/**
	 * \class KeyDerivationFunction  qca_basic.h QtCrypto
	 *
	 * General superclass for key derivation algorithms.
	 *
	 * %KeyDerivationFunction is a superclass for the various 
	 * key derivation function algorithms within %QCA. You should
	 * not need to use it directly unless you are
	 * adding another key derivation capability to %QCA - you should be
	 * using a sub-class. PBKDF2 using SHA1 is recommended for new applications.
	 */
	class QCA_EXPORT KeyDerivationFunction : public Algorithm
	{
	public:
		/**
		 * Standard copy constructor
		 */
		KeyDerivationFunction(const KeyDerivationFunction &from);
		~KeyDerivationFunction();

		/**
		   Assignment operator.

		   Copies the state (including key) from one KeyDerivationFunction
		   to another
		 */
		KeyDerivationFunction & operator=(const KeyDerivationFunction &from);

		/**
		 * Generate the key from a specified secret and salt value.
		 * 
		 * \note key length is ignored for some functions
		 *
		 * \param secret the secret (password or passphrase)
		 * \param salt the salt to use
		 * \param keyLength the length of key to return
		 * \param iterationCount the number of iterations to perform
		 *
		 * \return the derived key
		 */
		SymmetricKey makeKey(const SecureArray &secret, const InitializationVector &salt, unsigned int keyLength, unsigned int iterationCount);

		/**
		 * Construct the name of the algorithm
		 *
		 * You can use this to build a standard name string.
		 * You probably only need this method if you are 
		 * creating a new subclass.
		 */
		static QString withAlgorithm(const QString &kdfType, const QString &algType);

	protected:
		/**
		 * Special constructor for subclass initialisation
 		 */
		KeyDerivationFunction(const QString &type, const QString &provider);

	private:
		class Private;
		Private *d;
	};

	/**
	   \class PBKDF1 qca_basic.h QtCrypto

	   Password based key derivation function version 1

	   This class implements Password Based Key Derivation Function version 1,
	   as specified in RFC2898, and also in PKCS#5.
	 */
	class QCA_EXPORT PBKDF1 : public KeyDerivationFunction
	{
	public:
		/**
		   Standard constructor
		   
		   \param algorithm the name of the hashing algorithm to use
		   \param provider the name of the provider to use, if available
		*/
		PBKDF1(const QString &algorithm = "sha1", const QString &provider = QString()) : KeyDerivationFunction(withAlgorithm("pbkdf1", algorithm), provider) {}
	};

	/**
	   \class PBKDF2 qca_basic.h QtCrypto

	   Password based key derivation function version 2

	   This class implements Password Based Key Derivation Function version 2,
	   as specified in RFC2898, and also in PKCS#5.
	 */
	class QCA_EXPORT PBKDF2 : public KeyDerivationFunction
	{
	public:
		/**
		   Standard constructor
		   
		   \param algorithm the name of the hashing algorithm to use
		   \param provider the name of the provider to use, if available
		*/
		PBKDF2(const QString &algorithm = "sha1", const QString &provider = QString()) : KeyDerivationFunction(withAlgorithm("pbkdf2", algorithm), provider) {}
	};
}

#endif