mirror of
https://github.com/QuasarApp/openssl.git
synced 2025-05-04 13:39:38 +00:00
2ff16afc17
Aes-ecb mode can be optimized by inverleaving cipher operation on
several blocks and loop unrolling. Interleaving needs one ideal
unrolling factor, here we adopt the same factor with aes-cbc,
which is described as below:
If blocks number > 5, select 5 blocks as one iteration,every
loop, decrease the blocks number by 5.
If 3 < left blocks < 5 select 3 blocks as one iteration, every
loop, decrease the block number by 3.
If left blocks < 3, treat them as tail blocks.
Detailed implementation will have a little adjustment for squeezing
code space.
With this way, for small size such as 16 bytes, the performance is
similar as before, but for big size such as 16k bytes, the performance
improves a lot, even reaches to 100%, for some arches such as A57,
the improvement even exceeds 100%. The following table will list the
encryption performance data on aarch64, take a72 and a57 as examples.
Performance value takes the unit of cycles per byte, takes the format
as comparision of values. List them as below:
A72:
Before optimization After optimization Improve
evp-aes-128-ecb@16 17.26538237 16.82663866 2.61%
evp-aes-128-ecb@64 5.50528499 5.222637557 5.41%
evp-aes-128-ecb@256 2.632700213 1.908442892 37.95%
evp-aes-128-ecb@1024 1.876102047 1.078018868 74.03%
evp-aes-128-ecb@8192 1.6550392 0.853982929 93.80%
evp-aes-128-ecb@16384 1.636871283 0.847623957 93.11%
evp-aes-192-ecb@16 17.73104961 17.09692468 3.71%
evp-aes-192-ecb@64 5.78984398 5.418545192 6.85%
evp-aes-192-ecb@256 2.872005308 2.081815274 37.96%
evp-aes-192-ecb@1024 2.083226672 1.25095642 66.53%
evp-aes-192-ecb@8192 1.831992057 0.995916251 83.95%
evp-aes-192-ecb@16384 1.821590009 0.993820525 83.29%
evp-aes-256-ecb@16 18.0606306 17.96963317 0.51%
evp-aes-256-ecb@64 6.19651997 5.762465812 7.53%
evp-aes-256-ecb@256 3.176991394 2.24642538 41.42%
evp-aes-256-ecb@1024 2.385991919 1.396018192 70.91%
evp-aes-256-ecb@8192 2.147862636 1.142222597 88.04%
evp-aes-256-ecb@16384 2.131361787 1.135944617 87.63%
A57:
Before optimization After optimization Improve
evp-aes-128-ecb@16 18.61045121 18.36456218 1.34%
evp-aes-128-ecb@64 6.438628994 5.467959461 17.75%
evp-aes-128-ecb@256 2.957452881 1.97238604 49.94%
evp-aes-128-ecb@1024 2.117096219 1.099665054 92.52%
evp-aes-128-ecb@8192 1.868385973 0.837440804 123.11%
evp-aes-128-ecb@16384 1.853078526 0.822420027 125.32%
evp-aes-192-ecb@16 19.07021756 18.50018552 3.08%
evp-aes-192-ecb@64 6.672351486 5.696088921 17.14%
evp-aes-192-ecb@256 3.260427769 2.131449916 52.97%
evp-aes-192-ecb@1024 2.410522832 1.250529718 92.76%
evp-aes-192-ecb@8192 2.17921605 0.973225504 123.92%
evp-aes-192-ecb@16384 2.162250997 0.95919871 125.42%
evp-aes-256-ecb@16 19.3008384 19.12743654 0.91%
evp-aes-256-ecb@64 6.992950658 5.92149541 18.09%
evp-aes-256-ecb@256 3.576361743 2.287619504 56.34%
evp-aes-256-ecb@1024 2.726671027 1.381267599 97.40%
evp-aes-256-ecb@8192 2.493583657 1.110959913 124.45%
evp-aes-256-ecb@16384 2.473916816 1.099967073 124.91%
Change-Id: Iccd23d972e0d52d22dc093f4c208f69c9d5a0ca7
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10518)
Copyright (c) 1998-2018 The OpenSSL Project
Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
All rights reserved.
DESCRIPTION
-----------
The OpenSSL Project is a collaborative effort to develop a robust,
commercial-grade, fully featured, and Open Source toolkit implementing the
Transport Layer Security (TLS) protocols (including SSLv3) as well as a
full-strength general purpose cryptographic library.
OpenSSL is descended from the SSLeay library developed by Eric A. Young
and Tim J. Hudson.
The OpenSSL toolkit is licensed under the Apache License 2.0, which means
that you are free to get and use it for commercial and non-commercial
purposes as long as you fulfill its conditions.
OVERVIEW
--------
The OpenSSL toolkit includes:
libssl (with platform specific naming):
Provides the client and server-side implementations for SSLv3 and TLS.
libcrypto (with platform specific naming):
Provides general cryptographic and X.509 support needed by SSL/TLS but
not logically part of it.
openssl:
A command line tool that can be used for:
Creation of key parameters
Creation of X.509 certificates, CSRs and CRLs
Calculation of message digests
Encryption and decryption
SSL/TLS client and server tests
Handling of S/MIME signed or encrypted mail
And more...
INSTALLATION
------------
See the appropriate file:
INSTALL Linux, Unix, Windows, OpenVMS, ...
NOTES.* INSTALL addendums for different platforms
SUPPORT
-------
See the OpenSSL website www.openssl.org for details on how to obtain
commercial technical support. Free community support is available through the
openssl-users email list (see
https://www.openssl.org/community/mailinglists.html for further details).
If you have any problems with OpenSSL then please take the following steps
first:
- Download the latest version from the repository
to see if the problem has already been addressed
- Configure with no-asm
- Remove compiler optimization flags
If you wish to report a bug then please include the following information
and create an issue on GitHub:
- OpenSSL version: output of 'openssl version -a'
- Configuration data: output of 'perl configdata.pm --dump'
- OS Name, Version, Hardware platform
- Compiler Details (name, version)
- Application Details (name, version)
- Problem Description (steps that will reproduce the problem, if known)
- Stack Traceback (if the application dumps core)
Just because something doesn't work the way you expect does not mean it
is necessarily a bug in OpenSSL. Use the openssl-users email list for this type
of query.
HOW TO CONTRIBUTE TO OpenSSL
----------------------------
See CONTRIBUTING
LEGALITIES
----------
A number of nations restrict the use or export of cryptography. If you
are potentially subject to such restrictions you should seek competent
professional legal advice before attempting to develop or distribute
cryptographic code.