With KTLS, writes to an SSL connection store the application buffer
pointer directly in the 'buf' member instead of allocating a separate
buffer to hold the encrypted data. As a result,
ssl3_release_write_buffer() has to avoid freeing these 'buf' pointers.
Previously, ssl3_release_write_buffer() checked for KTLS being enabled
on the write BIO to determine if a buffer should be freed. However, a
buffer can outlive a BIO. For example, 'openssl s_time' creates new
write BIOs when reusing sessions. Since the new BIO did not have KTLS
enabled at the start of a connection, ssl3_release_write_buffer()
would incorrectly try to free the 'buf' pointer from the previous KTLS
connection. To fix, track the state of 'buf' explicitly in
SSL3_BUFFER to determine if the 'buf' should be freed or simply
cleared.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10489)
If we hit an EOF while reading in libssl then we will report an error
back to the application (SSL_ERROR_SYSCALL) but errno will be 0. We add
an error to the stack (which means we instead return SSL_ERROR_SSL) and
therefore give a hint as to what went wrong.
Contains a partial fix for #10880
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/10907)
The kernel will generate the MAC when transmitting the frame. Doing
so here causes the MAC to be included as part of the plain text that
the kernel MACs and encrypts. Note that this path is not taken when
using stitched cipher suites.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10045)
Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like
'*_lcl.h', '*_local.h', or '*_int.h'
This commit changes the different suffixes to '*_local.h' uniformly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
At some point in the past do_ssl3_write() used to return the number of
bytes written, or a value <= 0 on error. It now just returns a success/
error code and writes the number of bytes written to |tmpwrit|.
The SSL_MODE_RELEASE_BUFFERS code was still looking at the return code
for the number of bytes written rather than |tmpwrit|. This has the effect
that the buffers are not released when they are supposed to be.
Fixes#9490
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9505)
If we receive a KeyUpdate message (update requested) from the peer while
we are in the middle of a write, we should defer sending the responding
KeyUpdate message until after the current write is complete. We do this
by waiting to send the KeyUpdate until the next time we write and there is
no pending write data.
This does imply a subtle change in behaviour. Firstly the responding
KeyUpdate message won't be sent straight away as it is now. Secondly if
the peer sends multiple KeyUpdates without us doing any writing then we
will only send one response, as opposed to previously where we sent a
response for each KeyUpdate received.
Fixes#8677
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/8773)
With the removal of SSLv2, the s3 structure is always allocated, so
there is little point in having it be an allocated pointer. Collapse
the ssl3_state_st structure into ssl_st and fixup any references.
This should be faster than going through an indirection and due to
fewer allocations, but I'm not seeing any significant performance
improvement; it seems to be within the margin of error in timing.
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7888)
This patch adds support for the Linux TLS Rx socket option.
It completes the previous patch for TLS Tx offload.
If the socket option is successful, then the receive data-path of the TCP
socket is implemented by the kernel.
We choose to set this option at the earliest - just after CCS is complete.
Change-Id: I59741e04d89dddca7fb138e88fffcc1259b30132
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7848)
This patch adds support for the Linux TLS Tx socket option.
If the socket option is successful, then the data-path of the TCP socket
is implemented by the kernel.
We choose to set this option at the earliest - just after CCS is complete.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5253)
If we've sent a close_notify then we are restricted about what we can do
in response to handshake messages that we receive. However we can sensibly
process NewSessionTicket messages. We can also process a KeyUpdate message
as long as we also ignore any request for us to update our sending keys.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7114)
At certain points in the handshake we could receive either a plaintext or
an encrypted alert from the client. We should tolerate both where
appropriate.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6887)
If we sent early_data and then received back an HRR, the enc_write_ctx
was stale resulting in errors if an alert needed to be sent.
Thanks to Quarkslab for reporting this.
In any case it makes little sense to encrypt alerts using the
client_early_traffic_secret, so we add special handling for alerts sent
after early_data. All such alerts are sent in plaintext.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6887)
Currently if you encounter application data while waiting for a
close_notify from the peer, and you have called SSL_shutdown() then
you will get a -1 return (fatal error) and SSL_ERROR_SYSCALL from
SSL_get_error(). This isn't accurate (it should be SSL_ERROR_SSL) and
isn't persistent (you can call SSL_shutdown() again and it might then work).
We change this into a proper fatal error that is persistent.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6340)
In the case where we are shutdown for writing and awaiting a close_notify
back from a subsequent SSL_shutdown() call we skip over handshake data
that is received. This should not be treated as an error - instead it
should be signalled with SSL_ERROR_WANT_READ.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6340)
If we've sent a close_notify and we're waiting for one back we drop
incoming records until we see the close_notify we're looking for. If
SSL_MODE_AUTO_RETRY is on, then we should immediately try and read the
next record.
Fixes#6262
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6340)
Commit 4aa5a5669 accidentally missed off the catch all case of ignoring all
warning alerts that are otherwise unhandled. This breaks the SSLv3 tests
which send a "no certificate" warning alert.
Fixes#6496
[extended tests]
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/6509)
In TLSv1.3 we should ignore the severity level of an alert according to
the spec.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6370)
According to TLSv1.3 draft-24 the record version for ClientHello2 should
be TLS1.2, and not TLS1.0 as it is now.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5377)
If a server receives an unexpected ClientHello then we may or may not
accept it. Make sure all such decisions are made in the state machine
and not in the record layer. This also removes a disparity between the
TLS and the DTLS code. The TLS code was making this decision in the
record layer, while the DTLS code was making it later.
Finally it also solves a problem where a warning alert was being sent
during tls_setup_handshake() and the function was returning a failure
return code. This is problematic because it can be called from a
transition function - which we only allow fatal errors to occur in.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5190)
It's argued that /WX allows to keep better focus on new code, which
motivates its comeback...
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4721)
If SSL_read() is called with a zero length buffer, and we read a zero length
record then we should mark that record as read.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4685)
Since return is inconsistent, I removed unnecessary parentheses and
unified them.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4541)
Removed e_os.h from all bar three headers (apps/apps.h crypto/bio/bio_lcl.h and
ssl/ssl_locl.h).
Added e_os.h into the files that need it now.
Directly reference internal/nelem.h when required.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4188)
Remove GETPID_IS_MEANINGLESS and osslargused.
Move socket-related things to new file internal/sockets.h; this is now
only needed by four(!!!) files. Compiles should be a bit faster.
Remove USE_SOCKETS ifdef's
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4209)
We prevent compression both when the server is parsing the ClientHello
and when the client is constructing the ClientHello. A 1.3 ServerHello
has no way to hand us back a compression method, and we already check
that the server does not try to give us back a compression method that
we did not request, so these checks seem sufficient.
Weaken the INSTALL note slightly, as we do now expect to interoperate
with other implementations.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3131)
Signed-off-by: Paul Yang <paulyang.inf@gmail.com>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3622)
The check for SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION is
inconsistent. Most places check SSL->options, one place is checking
SSL_CTX->options; fix that.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
GH: #3523
An alert message is 2 bytes long. In theory it is permissible in SSLv3 -
TLSv1.2 to fragment such alerts across multiple records (some of which
could be empty). In practice it make no sense to send an empty alert
record, or to fragment one. TLSv1.3 prohibts this altogether and other
libraries (BoringSSL, NSS) do not support this at all. Supporting it adds
significant complexity to the record layer, and its removal is unlikely
to cause inter-operability issues.
The DTLS code for this never worked anyway and it is not supported at a
protocol level for DTLS. Similarly fragmented DTLS handshake records only
work at a protocol level where at least the handshake message header
exists within the record. DTLS code existed for trying to handle fragmented
handshake records smaller than this size. This code didn't work either so
has also been removed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3476)
