Refresh autotools generated files

ELFIOTest/Makefile.in

@@ -471,7 +471,7 @@ target_alias = @target_alias@
 top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
-AM_CPPFLAGS = -I$(top_srcdir)
+AM_CPPFLAGS = -I$(top_srcdir)/..
 ELFIOTest_SOURCES = ELFIOTest.cpp ELFIOTest1.cpp
 ELFIOTest_LDADD = -lboost_unit_test_framework
 TESTS = runELFtests

depcomp

@@ -1,10 +1,9 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2011-12-04.11; # UTC
+scriptversion=2018-03-07.03; # UTC
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010,
+# Copyright (C) 1999-2018 Free Software Foundation, Inc.
-# 2011 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -17,7 +16,7 @@ scriptversion=2011-12-04.11; # UTC
 # GNU General Public License for more details.
 
 # You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -28,7 +27,7 @@ scriptversion=2011-12-04.11; # UTC
 
 case $1 in
   '')
-     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
+    echo "$0: No command.  Try '$0 --help' for more information." 1>&2
     exit 1;
     ;;
   -h | --h*)
@@ -40,8 +39,8 @@ as side-effects.
 
 Environment variables:
   depmode     Dependency tracking mode.
-  source      Source file read by `PROGRAMS ARGS'.
+  source      Source file read by 'PROGRAMS ARGS'.
-  object      Object file output by `PROGRAMS ARGS'.
+  object      Object file output by 'PROGRAMS ARGS'.
   DEPDIR      directory where to store dependencies.
   depfile     Dependency file to output.
   tmpdepfile  Temporary file to use when outputting dependencies.
@@ -57,6 +56,66 @@ EOF
     ;;
 esac
 
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'.  Note that this directory component will
+# be either empty or ending with a '/' character.  This is deliberate.
+set_dir_from ()
+{
+  case $1 in
+    */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+      *) dir=;;
+  esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+  base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+  echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+  # If the compiler actually managed to produce a dependency file,
+  # post-process it.
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form 'foo.o: dependency.h'.
+    # Do two passes, one to just change these to
+    #   $object: dependency.h
+    # and one to simply output
+    #   dependency.h:
+    # which is needed to avoid the deleted-header problem.
+    { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+      sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+    } > "$depfile"
+    rm -f "$tmpdepfile"
+  else
+    make_dummy_depfile
+  fi
+}
+
+# A tabulation character.
+tab='	'
+# A newline character.
+nl='
+'
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
+
 if test -z "$depmode" || test -z "$source" || test -z "$object"; then
   echo "depcomp: Variables source, object and depmode must be set" 1>&2
   exit 1
@@ -69,6 +128,9 @@ tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
 
 rm -f "$tmpdepfile"
 
+# Avoid interferences from the environment.
+gccflag= dashmflag=
+
 # Some modes work just like other modes, but use different flags.  We
 # parameterize here, but still list the modes in the big case below,
 # to make depend.m4 easier to write.  Note that we *cannot* use a case
@@ -102,6 +164,12 @@ if test "$depmode" = msvc7msys; then
   depmode=msvc7
 fi
 
+if test "$depmode" = xlc; then
+  # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+  gccflag=-qmakedep=gcc,-MF
+  depmode=gcc
+fi
+
 case "$depmode" in
 gcc3)
 ## gcc 3 implements dependency tracking that does exactly what
@@ -122,8 +190,7 @@ gcc3)
   done
   "$@"
   stat=$?
-  if test $stat -eq 0; then :
+  if test $stat -ne 0; then
-  else
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -131,13 +198,17 @@ gcc3)
   ;;
 
 gcc)
+## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+## (see the conditional assignment to $gccflag above).
 ## There are various ways to get dependency output from gcc.  Here's
 ## why we pick this rather obscure method:
 ## - Don't want to use -MD because we'd like the dependencies to end
 ##   up in a subdir.  Having to rename by hand is ugly.
 ##   (We might end up doing this anyway to support other compilers.)
 ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
+##   -MM, not -M (despite what the docs say).  Also, it might not be
+##   supported by the other compilers which use the 'gcc' depmode.
 ## - Using -M directly means running the compiler twice (even worse
 ##   than renaming).
   if test -z "$gccflag"; then
@@ -145,32 +216,30 @@ gcc)
   fi
   "$@" -Wp,"$gccflag$tmpdepfile"
   stat=$?
-  if test $stat -eq 0; then :
+  if test $stat -ne 0; then
-  else
     rm -f "$tmpdepfile"
     exit $stat
   fi
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+  # The second -e expression handles DOS-style file names with drive
-## The second -e expression handles DOS-style file names with drive letters.
+  # letters.
   sed -e 's/^[^:]*: / /' \
       -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
+## This next piece of magic avoids the "deleted header file" problem.
 ## The problem is that when a header file which appears in a .P file
 ## is deleted, the dependency causes make to die (because there is
 ## typically no way to rebuild the header).  We avoid this by adding
 ## dummy dependencies for each header file.  Too bad gcc doesn't do
 ## this for us directly.
-  tr ' ' '
+## Some versions of gcc put a space before the ':'.  On the theory
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'.  On the theory
 ## that the space means something, we add a space to the output as
 ## well.  hp depmode also adds that space, but also prefixes the VPATH
 ## to the object.  Take care to not repeat it in the output.
 ## Some versions of the HPUX 10.20 sed can't process this invocation
 ## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
     | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
@@ -189,8 +258,7 @@ sgi)
     "$@" -MDupdate "$tmpdepfile"
   fi
   stat=$?
-  if test $stat -eq 0; then :
+  if test $stat -ne 0; then
-  else
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -198,43 +266,41 @@ sgi)
 
   if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
     echo "$object : \\" > "$depfile"
-
     # Clip off the initial element (the dependent).  Don't try to be
     # clever and replace this with sed code, as IRIX sed won't handle
     # lines with more than a fixed number of characters (4096 in
     # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
-    # the IRIX cc adds comments like `#:fec' to the end of the
+    # the IRIX cc adds comments like '#:fec' to the end of the
     # dependency line.
-    tr ' ' '
+    tr ' ' "$nl" < "$tmpdepfile" \
-' < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+      | tr "$nl" ' ' >> "$depfile"
-    tr '
-' ' ' >> "$depfile"
     echo >> "$depfile"
-
     # The second pass generates a dummy entry for each header file.
-    tr ' ' '
+    tr ' ' "$nl" < "$tmpdepfile" \
-' < "$tmpdepfile" \
       | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
       >> "$depfile"
   else
-    # The sourcefile does not contain any dependencies, so just
+    make_dummy_depfile
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
   fi
   rm -f "$tmpdepfile"
   ;;
 
+xlc)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
 aix)
   # The C for AIX Compiler uses -M and outputs the dependencies
   # in a .u file.  In older versions, this file always lives in the
-  # current directory.  Also, the AIX compiler puts `$object:' at the
+  # current directory.  Also, the AIX compiler puts '$object:' at the
   # start of each line; $object doesn't have directory information.
   # Version 6 uses the directory in both cases.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  set_dir_from "$object"
-  test "x$dir" = "x$object" && dir=
+  set_base_from "$object"
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
   if test "$libtool" = yes; then
     tmpdepfile1=$dir$base.u
     tmpdepfile2=$base.u
@@ -247,9 +313,7 @@ aix)
     "$@" -M
   fi
   stat=$?
-
+  if test $stat -ne 0; then
-  if test $stat -eq 0; then :
-  else
     rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
     exit $stat
   fi
@@ -258,44 +322,100 @@ aix)
   do
     test -f "$tmpdepfile" && break
   done
-  if test -f "$tmpdepfile"; then
+  aix_post_process_depfile
-    # Each line is of the form `foo.o: dependent.h'.
+  ;;
-    # Do two passes, one to just change these to
+
-    # `$object: dependent.h' and one to simply `dependent.h:'.
+tcc)
-    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+  # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
-    # That's a tab and a space in the [].
+  # FIXME: That version still under development at the moment of writing.
-    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+  #        Make that this statement remains true also for stable, released
-  else
+  #        versions.
-    # The sourcefile does not contain any dependencies, so just
+  # It will wrap lines (doesn't matter whether long or short) with a
-    # store a dummy comment line, to avoid errors with the Makefile
+  # trailing '\', as in:
-    # "include basename.Plo" scheme.
+  #
-    echo "#dummy" > "$depfile"
+  #   foo.o : \
+  #    foo.c \
+  #    foo.h \
+  #
+  # It will put a trailing '\' even on the last line, and will use leading
+  # spaces rather than leading tabs (at least since its commit 0394caf7
+  # "Emit spaces for -MD").
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
   fi
+  rm -f "$depfile"
+  # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+  # We have to change lines of the first kind to '$object: \'.
+  sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+  # And for each line of the second kind, we have to emit a 'dep.h:'
+  # dummy dependency, to avoid the deleted-header problem.
+  sed -n -e 's|^  *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
-icc)
+## The order of this option in the case statement is important, since the
-  # Intel's C compiler understands `-MD -MF file'.  However on
+## shell code in configure will try each of these formats in the order
-  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+## listed in this file.  A plain '-MD' option would be understood by many
-  # ICC 7.0 will fill foo.d with something like
+## compilers, so we must ensure this comes after the gcc and icc options.
-  #    foo.o: sub/foo.c
+pgcc)
-  #    foo.o: sub/foo.h
+  # Portland's C compiler understands '-MD'.
-  # which is wrong.  We want:
+  # Will always output deps to 'file.d' where file is the root name of the
-  #    sub/foo.o: sub/foo.c
+  # source file under compilation, even if file resides in a subdirectory.
-  #    sub/foo.o: sub/foo.h
+  # The object file name does not affect the name of the '.d' file.
-  #    sub/foo.c:
+  # pgcc 10.2 will output
-  #    sub/foo.h:
-  # ICC 7.1 will output
   #    foo.o: sub/foo.c sub/foo.h
-  # and will wrap long lines using \ :
+  # and will wrap long lines using '\' :
   #    foo.o: sub/foo.c ... \
   #     sub/foo.h ... \
   #     ...
+  set_dir_from "$object"
+  # Use the source, not the object, to determine the base name, since
+  # that's sadly what pgcc will do too.
+  set_base_from "$source"
+  tmpdepfile=$base.d
 
-  "$@" -MD -MF "$tmpdepfile"
+  # For projects that build the same source file twice into different object
+  # files, the pgcc approach of using the *source* file root name can cause
+  # problems in parallel builds.  Use a locking strategy to avoid stomping on
+  # the same $tmpdepfile.
+  lockdir=$base.d-lock
+  trap "
+    echo '$0: caught signal, cleaning up...' >&2
+    rmdir '$lockdir'
+    exit 1
+  " 1 2 13 15
+  numtries=100
+  i=$numtries
+  while test $i -gt 0; do
+    # mkdir is a portable test-and-set.
+    if mkdir "$lockdir" 2>/dev/null; then
+      # This process acquired the lock.
+      "$@" -MD
       stat=$?
-  if test $stat -eq 0; then :
+      # Release the lock.
+      rmdir "$lockdir"
+      break
     else
+      # If the lock is being held by a different process, wait
+      # until the winning process is done or we timeout.
+      while test -d "$lockdir" && test $i -gt 0; do
+        sleep 1
+        i=`expr $i - 1`
+      done
+    fi
+    i=`expr $i - 1`
+  done
+  trap - 1 2 13 15
+  if test $i -le 0; then
+    echo "$0: failed to acquire lock after $numtries attempts" >&2
+    echo "$0: check lockdir '$lockdir'" >&2
+    exit 1
+  fi
+
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -307,8 +427,8 @@ icc)
   sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
   # Some versions of the HPUX 10.20 sed can't process this invocation
   # correctly.  Breaking it into two sed invocations is a workaround.
-  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
-    sed -e 's/$/ :/' >> "$depfile"
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -319,9 +439,8 @@ hp2)
   # 'foo.d', which lands next to the object file, wherever that
   # happens to be.
   # Much of this is similar to the tru64 case; see comments there.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  set_dir_from  "$object"
-  test "x$dir" = "x$object" && dir=
+  set_base_from "$object"
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
   if test "$libtool" = yes; then
     tmpdepfile1=$dir$base.d
     tmpdepfile2=$dir.libs/$base.d
@@ -332,8 +451,7 @@ hp2)
     "$@" +Maked
   fi
   stat=$?
-  if test $stat -eq 0; then :
+  if test $stat -ne 0; then
-  else
      rm -f "$tmpdepfile1" "$tmpdepfile2"
      exit $stat
   fi
@@ -343,8 +461,8 @@ hp2)
     test -f "$tmpdepfile" && break
   done
   if test -f "$tmpdepfile"; then
-    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+    sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
-    # Add `dependent.h:' lines.
+    # Add 'dependent.h:' lines.
     sed -ne '2,${
                s/^ *//
                s/ \\*$//
@@ -352,67 +470,51 @@ hp2)
                p
              }' "$tmpdepfile" >> "$depfile"
   else
-    echo "#dummy" > "$depfile"
+    make_dummy_depfile
   fi
   rm -f "$tmpdepfile" "$tmpdepfile2"
   ;;
 
 tru64)
   # The Tru64 compiler uses -MD to generate dependencies as a side
-   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+  # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-   # dependencies in `foo.d' instead, so we check for that too.
+  # dependencies in 'foo.d' instead, so we check for that too.
   # Subdirectories are respected.
-   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  set_dir_from  "$object"
-   test "x$dir" = "x$object" && dir=
+  set_base_from "$object"
-   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
 
   if test "$libtool" = yes; then
-      # With Tru64 cc, shared objects can also be used to make a
+    # Libtool generates 2 separate objects for the 2 libraries.  These
-      # static library.  This mechanism is used in libtool 1.4 series to
+    # two compilations output dependencies in $dir.libs/$base.o.d and
-      # handle both shared and static libraries in a single compilation.
-      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
-      #
-      # With libtool 1.5 this exception was removed, and libtool now
-      # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in $dir.libs/$base.o.d and
     # in $dir$base.o.d.  We have to check for both files, because
     # one of the two compilations can be disabled.  We should prefer
     # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
     # automatically cleaned when .libs/ is deleted, while ignoring
     # the former would cause a distcleancheck panic.
-      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
+    tmpdepfile1=$dir$base.o.d          # libtool 1.5
-      tmpdepfile2=$dir$base.o.d          # libtool 1.5
+    tmpdepfile2=$dir.libs/$base.o.d    # Likewise.
-      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
+    tmpdepfile3=$dir.libs/$base.d      # Compaq CCC V6.2-504
-      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
     "$@" -Wc,-MD
   else
-      tmpdepfile1=$dir$base.o.d
+    tmpdepfile1=$dir$base.d
     tmpdepfile2=$dir$base.d
     tmpdepfile3=$dir$base.d
-      tmpdepfile4=$dir$base.d
     "$@" -MD
   fi
 
   stat=$?
-   if test $stat -eq 0; then :
+  if test $stat -ne 0; then
-   else
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
     exit $stat
   fi
 
-   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
   do
     test -f "$tmpdepfile" && break
   done
-   if test -f "$tmpdepfile"; then
+  # Same post-processing that is required for AIX mode.
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+  aix_post_process_depfile
-      # That's a tab and a space in the [].
-      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
   ;;
 
 msvc7)
@@ -424,8 +526,7 @@ msvc7)
   "$@" $showIncludes > "$tmpdepfile"
   stat=$?
   grep -v '^Note: including file: ' "$tmpdepfile"
-  if test "$stat" = 0; then :
+  if test $stat -ne 0; then
-  else
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -443,14 +544,15 @@ msvc7)
   p
 }' | $cygpath_u | sort -u | sed -n '
 s/ /\\ /g
-s/\(.*\)/	\1 \\/p
+s/\(.*\)/'"$tab"'\1 \\/p
 s/.\(.*\) \\/\1:/
 H
 $ {
-  s/.*/	/
+  s/.*/'"$tab"'/
   G
   p
 }' >> "$depfile"
+  echo >> "$depfile" # make sure the fragment doesn't end with a backslash
   rm -f "$tmpdepfile"
   ;;
 
@@ -478,7 +580,7 @@ dashmstdout)
     shift
   fi
 
-  # Remove `-o $object'.
+  # Remove '-o $object'.
   IFS=" "
   for arg
   do
@@ -498,18 +600,18 @@ dashmstdout)
   done
 
   test -z "$dashmflag" && dashmflag=-M
-  # Require at least two characters before searching for `:'
+  # Require at least two characters before searching for ':'
   # in the target name.  This is to cope with DOS-style filenames:
-  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+  # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
   "$@" $dashmflag |
-    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
+    sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
   rm -f "$depfile"
   cat < "$tmpdepfile" > "$depfile"
-  tr ' ' '
+  # Some versions of the HPUX 10.20 sed can't process this sed invocation
-' < "$tmpdepfile" | \
+  # correctly.  Breaking it into two sed invocations is a workaround.
-## Some versions of the HPUX 10.20 sed can't process this invocation
+  tr ' ' "$nl" < "$tmpdepfile" \
-## correctly.  Breaking it into two sed invocations is a workaround.
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -562,11 +664,12 @@ makedepend)
   # makedepend may prepend the VPATH from the source file name to the object.
   # No need to regex-escape $object, excess matching of '.' is harmless.
   sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
-  sed '1,2d' "$tmpdepfile" | tr ' ' '
+  # Some versions of the HPUX 10.20 sed can't process the last invocation
-' | \
+  # correctly.  Breaking it into two sed invocations is a workaround.
-## Some versions of the HPUX 10.20 sed can't process this invocation
+  sed '1,2d' "$tmpdepfile" \
-## correctly.  Breaking it into two sed invocations is a workaround.
+    | tr ' ' "$nl" \
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile" "$tmpdepfile".bak
   ;;
 
@@ -583,7 +686,7 @@ cpp)
     shift
   fi
 
-  # Remove `-o $object'.
+  # Remove '-o $object'.
   IFS=" "
   for arg
   do
@@ -602,10 +705,10 @@ cpp)
     esac
   done
 
-  "$@" -E |
+  "$@" -E \
-    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+    | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+             -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-    sed '$ s: \\$::' > "$tmpdepfile"
+    | sed '$ s: \\$::' > "$tmpdepfile"
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
   cat < "$tmpdepfile" >> "$depfile"
@@ -652,8 +755,8 @@ msvisualcpp)
   sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
-  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
-  echo "	" >> "$depfile"
+  echo "$tab" >> "$depfile"
   sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
@@ -680,9 +783,9 @@ exit 0
 # Local Variables:
 # mode: shell-script
 # sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
+# eval: (add-hook 'before-save-hook 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
 # time-stamp-end: "; # UTC"
 # End:

install-sh

@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2011-01-19.21; # UTC
+scriptversion=2018-03-11.20; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -35,25 +35,21 @@ scriptversion=2011-01-19.21; # UTC
 # FSF changes to this file are in the public domain.
 #
 # Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
+# 'make' implicit rules from creating a file called install from it
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
 # from scratch.
 
+tab='	'
 nl='
 '
-IFS=" ""	$nl"
+IFS=" $tab$nl"
 
-# set DOITPROG to echo to test this script
+# Set DOITPROG to "echo" to test this script.
 
-# Don't use :- since 4.3BSD and earlier shells don't like it.
 doit=${DOITPROG-}
-if test -z "$doit"; then
+doit_exec=${doit:-exec}
-  doit_exec=exec
-else
-  doit_exec=$doit
-fi
 
 # Put in absolute file names if you don't have them in your path;
 # or use environment vars.
@@ -68,17 +64,6 @@ mvprog=${MVPROG-mv}
 rmprog=${RMPROG-rm}
 stripprog=${STRIPPROG-strip}
 
-posix_glob='?'
-initialize_posix_glob='
-  test "$posix_glob" != "?" || {
-    if (set -f) 2>/dev/null; then
-      posix_glob=
-    else
-      posix_glob=:
-    fi
-  }
-'
-
 posix_mkdir=
 
 # Desired mode of installed file.
@@ -97,7 +82,7 @@ dir_arg=
 dst_arg=
 
 copy_on_change=false
-no_target_directory=
+is_target_a_directory=possibly
 
 usage="\
 Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
@@ -143,8 +128,7 @@ while test $# -ne 0; do
 
     -m) mode=$2
         case $mode in
-	  *' '* | *'	'* | *'
+          *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
-'*	  | *'*'* | *'?'* | *'['*)
             echo "$0: invalid mode: $mode" >&2
             exit 1;;
         esac
@@ -155,14 +139,16 @@ while test $# -ne 0; do
 
     -s) stripcmd=$stripprog;;
 
-    -t) dst_arg=$2
+    -t)
-	# Protect names problematic for `test' and other utilities.
+        is_target_a_directory=always
+        dst_arg=$2
+        # Protect names problematic for 'test' and other utilities.
         case $dst_arg in
           -* | [=\(\)!]) dst_arg=./$dst_arg;;
         esac
         shift;;
 
-    -T) no_target_directory=true;;
+    -T) is_target_a_directory=never;;
 
     --version) echo "$0 $scriptversion"; exit $?;;
 
@@ -177,6 +163,16 @@ while test $# -ne 0; do
   shift
 done
 
+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+  if test -n "$dst_arg"; then
+    echo "$0: target directory not allowed when installing a directory." >&2
+    exit 1
+  fi
+fi
+
 if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
   # When -d is used, all remaining arguments are directories to create.
   # When -t is used, the destination is already specified.
@@ -190,7 +186,7 @@ if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
     fi
     shift # arg
     dst_arg=$arg
-    # Protect names problematic for `test' and other utilities.
+    # Protect names problematic for 'test' and other utilities.
     case $dst_arg in
       -* | [=\(\)!]) dst_arg=./$dst_arg;;
     esac
@@ -202,11 +198,20 @@ if test $# -eq 0; then
     echo "$0: no input file specified." >&2
     exit 1
   fi
-  # It's OK to call `install-sh -d' without argument.
+  # It's OK to call 'install-sh -d' without argument.
   # This can happen when creating conditional directories.
   exit 0
 fi
 
+if test -z "$dir_arg"; then
+  if test $# -gt 1 || test "$is_target_a_directory" = always; then
+    if test ! -d "$dst_arg"; then
+      echo "$0: $dst_arg: Is not a directory." >&2
+      exit 1
+    fi
+  fi
+fi
+
 if test -z "$dir_arg"; then
   do_exit='(exit $ret); exit $ret'
   trap "ret=129; $do_exit" 1
@@ -240,7 +245,7 @@ fi
 
 for src
 do
-  # Protect names problematic for `test' and other utilities.
+  # Protect names problematic for 'test' and other utilities.
   case $src in
     -* | [=\(\)!]) src=./$src;;
   esac
@@ -266,49 +271,31 @@ do
     fi
     dst=$dst_arg
 
-    # If destination is a directory, append the input filename; won't work
+    # If destination is a directory, append the input filename.
-    # if double slashes aren't ignored.
     if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
+      if test "$is_target_a_directory" = never; then
         echo "$0: $dst_arg: Is a directory" >&2
         exit 1
       fi
       dstdir=$dst
-      dst=$dstdir/`basename "$src"`
+      dstbase=`basename "$src"`
+      case $dst in
+	*/) dst=$dst$dstbase;;
+	*)  dst=$dst/$dstbase;;
+      esac
       dstdir_status=0
     else
-      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`dirname "$dst"`
-      dstdir=`
-	(dirname "$dst") 2>/dev/null ||
-	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	     X"$dst" : 'X\(//\)[^/]' \| \
-	     X"$dst" : 'X\(//\)$' \| \
-	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
-	echo X"$dst" |
-	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)[^/].*/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\).*/{
-		   s//\1/
-		   q
-		 }
-		 s/.*/./; q'
-      `
-
       test -d "$dstdir"
       dstdir_status=$?
     fi
   fi
 
+  case $dstdir in
+    */) dstdirslash=$dstdir;;
+    *)  dstdirslash=$dstdir/;;
+  esac
+
   obsolete_mkdir_used=false
 
   if test $dstdir_status != 0; then
@@ -345,34 +332,43 @@ do
             # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
             ;;
           *)
+            # Note that $RANDOM variable is not portable (e.g. dash);  Use it
+            # here however when possible just to lower collision chance.
             tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
 
+            trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+            # Because "mkdir -p" follows existing symlinks and we likely work
+            # directly in world-writeable /tmp, make sure that the '$tmpdir'
+            # directory is successfully created first before we actually test
+            # 'mkdir -p' feature.
             if (umask $mkdir_umask &&
-		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+                $mkdirprog $mkdir_mode "$tmpdir" &&
+                exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
             then
               if test -z "$dir_arg" || {
                    # Check for POSIX incompatibilities with -m.
                    # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writeable bit of parent directory when it shouldn't.
+                   # other-writable bit of parent directory when it shouldn't.
                    # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+                   test_tmpdir="$tmpdir/a"
+                   ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
                    case $ls_ld_tmpdir in
                      d????-?r-*) different_mode=700;;
                      d????-?--*) different_mode=755;;
                      *) false;;
                    esac &&
-		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+                   $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
-		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+                     ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
                      test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
                    }
                  }
               then posix_mkdir=:
               fi
-	      rmdir "$tmpdir/d" "$tmpdir"
+              rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
             else
               # Remove any dirs left behind by ancient mkdir implementations.
-	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+              rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
             fi
             trap '' 0;;
         esac;;
@@ -396,14 +392,12 @@ do
         *)  prefix='';;
       esac
 
-      eval "$initialize_posix_glob"
-
       oIFS=$IFS
       IFS=/
-      $posix_glob set -f
+      set -f
       set fnord $dstdir
       shift
-      $posix_glob set +f
+      set +f
       IFS=$oIFS
 
       prefixes=
@@ -450,8 +444,8 @@ do
   else
 
     # Make a couple of temp file names in the proper directory.
-    dsttmp=$dstdir/_inst.$$_
+    dsttmp=${dstdirslash}_inst.$$_
-    rmtmp=$dstdir/_rm.$$_
+    rmtmp=${dstdirslash}_rm.$$_
 
     # Trap to clean up those temp files at exit.
     trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
@@ -474,13 +468,10 @@ do
     if $copy_on_change &&
        old=`LC_ALL=C ls -dlL "$dst"     2>/dev/null` &&
        new=`LC_ALL=C ls -dlL "$dsttmp"  2>/dev/null` &&
-
+       set -f &&
-       eval "$initialize_posix_glob" &&
-       $posix_glob set -f &&
        set X $old && old=:$2:$4:$5:$6 &&
        set X $new && new=:$2:$4:$5:$6 &&
-       $posix_glob set +f &&
+       set +f &&
-
        test "$old" = "$new" &&
        $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
     then
@@ -519,9 +510,9 @@ do
 done
 
 # Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
+# eval: (add-hook 'before-save-hook 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
 # time-stamp-end: "; # UTC"
 # End:

missing

@@ -1,9 +1,9 @@
 #! /bin/sh
 # Common wrapper for a few potentially missing GNU programs.
 
-scriptversion=2013-10-28.13; # UTC
+scriptversion=2018-03-07.03; # UTC
 
-# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+# Copyright (C) 1996-2018 Free Software Foundation, Inc.
 # Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
@@ -17,7 +17,7 @@ scriptversion=2013-10-28.13; # UTC
 # GNU General Public License for more details.
 
 # You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -101,9 +101,9 @@ else
   exit $st
 fi
 
-perl_URL=http://www.perl.org/
+perl_URL=https://www.perl.org/
-flex_URL=http://flex.sourceforge.net/
+flex_URL=https://github.com/westes/flex
-gnu_software_URL=http://www.gnu.org/software
+gnu_software_URL=https://www.gnu.org/software
 
 program_details ()
 {
@@ -207,9 +207,9 @@ give_advice "$1" | sed -e '1s/^/WARNING: /' \
 exit $st
 
 # Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
+# eval: (add-hook 'before-save-hook 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
 # time-stamp-end: "; # UTC"
 # End: